| Sterilizer Manufacturer: Market Forge |
| Model of Sterilizer: Market Forge STM-E |
|
Problem Title:
not reaching temp |
|
Problem Description:
I have a Market Forge STM-E and I only reach a temp of 110c. I have adjusted the pressure switch so the two ranges are 13# and 16#. The switch seem to be o/k and it has a new steam trap. I can't get service until Monday but I have an inspection on Tueday so I would like to get a jump on therepair. |
|
Solutions |
| 1. The 2 pressure switches work as the sensors to control the power supplies to its heating elements. If there is no too much steam out from the trap, (I mean there are still lots of water remaining inside the chamber), then you need to check these 2 pressure switches again. This machine control unit is pretty simple, no too many factors involved. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |