| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: Validator 10 PLUS |
|
Problem Title:
fix validator 10 Plus AD vs refurbing a PC OCR |
|
Problem Description:
I've got a Validator 10 Plus AD that I've put a board on each 12-15 months for the past 3 or 4 years and an old P/C OCR I bought off of ebay that will heat up but not pressure up (gasket is old or some more expensive problem). the Validator 10 plus AD is up to its old trick of heating/pressuring up but never "reaching the end" of the cycle and releasing pressure and cooling down (without unplugging). What would you recommend; new board for the 10 plus, convert the 10 plus to analog, refurb the OCR? or some other option. email rttdmd@newwwavecomm.net and traran@hughes.net or call 270-841-9803 |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |