| Sterilizer Manufacturer: Castle |
| Model of Sterilizer: |
|
Problem Title:
speedclave 777 leaks |
|
Problem Description:
I just bought an old speedclave 777. Its leaking looks like from the back end. Is there a seal I can replace there? Also the control know on the top is broken. How can i repair it? Thanks Jef f Gallimore |
| Reasons |
| 1. There is a bellows that gets screwed to the rest tray that gets fitted on the inside of the chamber.This should close the opening on the back of the chamber as it heats up. It needs to bleed air/steam out at the beggining of the cycle so there is no cold spots in the chamber. |
|
Solutions |
| 1. If bellows cannot be adjusted to spec, you will need to replace it. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |