Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search

Sterilizer Manufacturer:
Tuttnauer
Model of Sterilizer:
Problem Title:
Tuttnauer E/EA/EK/EKA Temperature Problem
Problem Description:
Low Temperature message is displayed
Reasons
1.

Low Temperature

- Refers to temperature in the Chamber after the sterilization temperature has been reached.
If the temperature drops 4.50F below the required sterilization temperature the cycle will abort.

Solutions

1. Temperature Sensor is defective and should be replaced
2. Bad Heating Elements -- not producing enough wattage
3. Heating Elements not cycling on and off properly.
4. Insufficient water in the Chamber
5. Water leaking out of the Chamber.
6. The sterilization phase of the cycle has been set for too long a period of time, allowing the Chamber water to boil away, and the Chamber to run dry.
7. Safety Thermostat opening prematurely, turning off the Heating Elements only on units with control proms earlier than T93N3

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us