Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search

Sterilizer Manufacturer:
Tuttnauer
Model of Sterilizer:
Problem Title:
Tuttnauer E/EA/EK/EAK Leaking Water or Steam
Problem Description:
Tuttnauer water leaking from under the autoclave
Reasons
1. some pipe connections, fittings is loosing

Solutions

1. Remove the Outer Cabinet and inspect all fittings for leaks. Tighten loose fittings and replace broken ones.

Inspect the Water Reservoir for cracks or holes.

Inspect the Heating Elements for signs of rust that would indicate a leak in the Chamber.

Check if the Cooling Coil exit spout is pointed in a direction that would allow water to come out of the Reservoir. Reposition the Cooling Coil as necessary.

Check if the Reservoir Gasket is in place and not damaged

Check that the Reservoir is not being over filled. The Reservoir should never be filled while the unit is sterilizing. It should only be filled as high as the base of the Safety Valve Holder.

Check if while cleaning the autoclave, rinse water hasn’t spilled out of the Chamber and run underneath the Chamber into the autoclave

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us