| Sterilizer Manufacturer: |
| Model of Sterilizer: |
|
Problem Title:
M9, M11 Sterilizer |
|
Problem Description:
M9, M11 Sterilizer |
| Reasons |
| 1. M11 is a large digital control sterilizer from Midmark company. Its structure is very similar to its "Young Brother" M9. |
| 2. In the design tech, the Midmark M9 and M11 have a big difference than Tuttnauer E and Pelton & Crane Delta in Fill. The Midmark M9/M11 filling without pump is controlled by a water sensor inside the chamber, the Tuttnauer E and Pelton & Crane Delta filling is controlled by time. Personally I like Midmark design in the water filling. As brand new machine, you can not find out much difference between M9/M11 and Tuttnauer E/Pelton & Crane Delta. However after the machine running for a period of time, the piping system will get dirty, the water flow inside the pipe will get slow, controlled by time will not as good as controlled by sensor inside the chamber. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |