Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search


Sterilizer Manufacturer:
Pelton & Crane
Model of Sterilizer:
Validator 10
Problem Title:
Pelton crane Validator 10 sterilizer - no power
Problem Description:
alpha retro validator with no power to lights or heating element. connected #1 & #2 from TCR4C relay as you suggested. still no lights. machine getting power as buzzer still works when i plug it in. visual inspection doesn't show any obvious burned or melted parts. is the relay bad the most likely cause? if so, please send me one. thanks

Solutions

1. Towards the front of the sterilizer on the bottom of the chamber is an overheat protector...this is right behind the front panel. Check the wiring on this. The heater element might also be bad and you need to check the ohms on it as this is part of the circuit. Another item to check is the door switch.

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us