| Sterilizer Manufacturer: Midmark |
| Model of Sterilizer: M11 |
|
Problem Title:
HIGH TEMP REACHED |
|
Problem Description:
WHEN STERILIZING PACKS DISPLAY SHOWS "HIGH TEMP REACHED WATER OVER LIM" UNPLUG AND REPLUG. WHEN REPLUGGED AND RAN AGAIN WE GET THE SAME DISPLAY. CAN YOU HELP US TROUBLESHOOT? PINKERTON ANIMAL HOSPITAL (701) 852-3055 |
| Reasons |
| 1. HIGH TEMP REACHED WATER OVER LIM We do not know exactly what it means for the above error message. Normally M9/M11 has their error code on the display like E001, E002, ... etc. From what your described, it seems to me that either the bellow, or one of the solenoid does not work properly. There is some air remaining inside the chamber, when the machine is building temperature and pressure. This is just for your reference, no guarantty on it before we test it. |
|
Solutions |
| 1. It is hard to guess what the problem is before we have a test running on this machine. The above analysis is just for your reference only. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |