| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer EHS The displayed pressure is sinificantly different than actucal pressure |
|
Problem Description:
Tuttnauer EHS The displayed pressure is sinificantly different than actucal pressure |
| Reasons |
| 1. Tuttnauer EHS The displayed pressure is sinificantly different than actucal pressure including both too high (over 50PSI) or too low (less than 7.3PSI) 1) Check the pressure sensor connection to JP1 on the ANL-T2 board 2) Make sure the system is correctly calibrated 3) Pressure sensor is contaminated or defective 4) ANL-T2 board is defective |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |