| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: Tuttnauer 2340 E/EK/EA/EKA |
|
Problem Title:
HIGH TEMP + water in chamber |
|
Problem Description:
Run is aborted at 121F and HIGH TEMP error msg is displayed when the autoclave is used on the liquid setting. There is also lots of water in the chamber that dumps out when you open the door after that run. |
| Reasons |
| 1. the chamber temperature is 9F higher than the required sterilization temperature this maybe happened elas if the temperature sensor is out of work |
|
Solutions |
| 1. Check the SSR, make sure it can go to ON/OFF/ON/OFF mode after the temperature reaches 121F Make sure both temperature and pressure reading are in good calibration. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |