Was doing a normal run when cicuit breaker blew. After we reset the breaker the unit would not power up. We then unplugged the unit for about an hour and tried again, with no results. Checked main toggle switch in back of unit, tried to power up with switch in either position, and again nothing. No light display.

We just now removed the case and discovered the cicuit board to be wet. We're going to let it dry thoroughly before attmpting to plug it back in. Can you suggest any precautions/resetting procedures to implement?

Thanks in advance!">

Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search


Sterilizer Manufacturer:
Pelton & Crane
Model of Sterilizer:
Validator 8 PLUS
Problem Title:
Validator PLUS model AC - Unit will not power up
Problem Description:
The model # on the digital unit says "Validator PLUS model AC".

Was doing a normal run when cicuit breaker blew. After we reset the breaker the unit would not power up. We then unplugged the unit for about an hour and tried again, with no results. Checked main toggle switch in back of unit, tried to power up with switch in either position, and again nothing. No light display.

We just now removed the case and discovered the cicuit board to be wet. We're going to let it dry thoroughly before attmpting to plug it back in. Can you suggest any precautions/resetting procedures to implement?

Thanks in advance!

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us