| Sterilizer Manufacturer: ALFA Medical Equipment |
| Model of Sterilizer: COX Dry Sterilizer |
|
Problem Title:
I have error code E-20 |
|
Problem Description:
I've checked for broken leads and unable to find any. What is the next step? Please e-mail to kimgee16@yahoo.com |
| Reasons |
| 1. Do you get this error as soon as you start the machine? Do you always get this error? Any other errors? It is possible that the thermocouple is bad even if there are no broken wires.Are the thermocouple leads soldered to the back of the circuit board or is it connected with push-on connectors? Looking at the back of the sterilizer,there is a blue and red wire attached to the circuit board on the left side. |
|
Solutions |
| 1. A bad thermocouple could be the reason for this error. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |