| Sterilizer Manufacturer: ALFA Medical Equipment |
| Model of Sterilizer: COX Dry Sterilizer |
|
Problem Title:
Cox E-31 error |
|
Problem Description:
E-31 error, internal fan not running when unit turned on, chamber only slightly warm after 10 minutes. |
|
Solutions |
| 1. E-31 ERROR is a low heat codition. If the main blower is not running, that is most likely the only problem. Trying to run with a bad blower can also burn out your heating element.The part number below is for a replacement blower but you would need to take the heater element from the old and install it on the new. You will also need to get some high temp rtv silicone. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |