| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: OCM |
|
Problem Title:
condensation inside cabinet |
|
Problem Description:
when i took the cover of my machine off to try and find a leak (which i found and eliminated) i discovered that there was a fair amount of condensation forming inside the machine enough that the case was begining to rust in areas and the insulation was damp where it is in contact with this water what do you suggest we do ? |
| Reasons |
| 1. If the leakage is fixed, you should not have a condensation problem anymore. The insulation should dry out after a couple of cycles especially if the cover is left off and the rust can be coated with some spray primer. |
|
Solutions |
| 1. The insulation should dry out after a couple of cycles especially if the cover is left off and the rust can be coated with some spray primer. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |