Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search

Sterilizer Manufacturer:
Tuttnauer
Model of Sterilizer:
Problem Title:
Tuttnauer E/EA/EK/EAK Printer Problem
Problem Description:
Printer does not print
Reasons
1. Check the solutions for details

Solutions

1. Make sure there is paper in the Printer

Make sure the paper is installed correctly

Make sure the paper is thermal paper

Make sure there is not scraps or paper stuck in the printer head.
Turn the unit off and unplug and replug in the Printer Cable

Make sure the # 8 dip switch (on the Digital Predg board) is in the up position. Cycle the machine off and then on if you had to move the dip switch

Turn the power off, press and hold the FEED button on the Printer and
turn the power back on. This should print a test pattern

If the Printer will not print a test pattern then replace the Printer

If the Printer does print a test pattern, but will not print data then replace the Printer Cable and or the Digital Predg board

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us