Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search


Sterilizer Manufacturer:
Tuttnauer
Model of Sterilizer:
Tuttnauer 3870 E
Problem Title:
Tuttnauer 3870E water did not drain from chamber
Problem Description:
The water did not drain from the chamber.

The water left in the bottom of the chamber is right is a medium amount. 273 degree cycle. we do not have printout capability


Solutions

1. How much water remaining after a cycle? a little or much.
How long do you set its dry time after the cycle?
Which cycle do you running. Is cycle 3: the 250F cycle?
Do you see an Exhausting phase following by the sterilizing phase? You can check this in the printout paper, normally 2 minutes.

Do you have the serial number and year made with you? Normally you can find out these information on the top of left side (view from the front of machine). There is a Tuttnauer Product Stick on.

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us