| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer EHS no response when the system is turned on |
|
Problem Description:
Tuttnauer EHS no response when the system is turned on |
| Reasons |
| 1. Tuttnauer EHS no response when the system is turned on with AC but no DC check the connection for the DC supply check the Test Point on the ANL-T2 board to make sure both 5V and 12V DC supplies are OK Check a good grounding for both ANL-T2 and DIG-T2 boards: make sure the grounding screws are tighted properly |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |