| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: Delta 10 |
|
Problem Title:
fails after sterilization temp and pressure are met |
|
Problem Description:
in the wrapped cycle pressure and temp drop below the parameters off and on untill 3 min is met and finally fails.. So what do i need to replace,change,fix Etc... and is this a common prblem for these sterilizers? The unwrapped cycle seems to work fine.. Thanks for yer time. |
|
Solutions |
| 1. Your information is very limited, it is too hard to guess the reason. What is the error code showed on the display after the cycle failed. Umwrapped and wrapped do not have too much difference in their settings except the sterilizing time. Try to run both cycles again. When the machine fails, please write down the error code and email us. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |