| Sterilizer Manufacturer: Market Forge |
| Model of Sterilizer: Market Forge STM-E |
|
Problem Title:
High Chamber Pressure |
|
Problem Description:
The timer switch was just replaced and the pressure goes up to 20-25 psi. There is some steam leaking from the pressure relief valve. What is causing this high pressure? At what pressure should one become concerned and what can be done to lower the pressure to 15 psi? The steam is not released when the timer switch was turned off manually. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |