| Sterilizer Manufacturer: ALFA Medical Equipment |
| Model of Sterilizer: COX Dry Sterilizer |
|
Problem Title:
cox streilizer error31 |
|
Problem Description:
error 31 on a cox sterilizer no heat heating element ohmes out @ 11.6 ohmes im assuming that is ok. the 2 leads for the heating element that plug into the circuit board are burnt up the 2 leads at the board are also burnt up. What voltage should I be reading at the circuit board to the heating element( I have no voltage now) Also if I replace the circuit board and the harness does this need to be recalibrated. jim mayer 314-878-8001 |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |