| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer M STE cycle unit overheats indicated by steam relief valve venting in reservoir or high pressure |
|
Problem Description:
Tuttnauer M STE cycle unit overheats indicated by steam relief valve venting in reservoir or high pressure |
| Reasons |
| 1. Tuttnauer M STE cycle unit overheats indicated by steam relief valve venting in reservoir or high pressure 1) Safety valve release below 38 PSI 2) Temperature controller set too high or out of calibration The heat light should be on/off during the STE temperature reached. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |