Sterilizer.com Sterilizer Parts Technical Home FAQ Search Submit a Question Your Local Service Login
Enter question keywords
to search


Sterilizer Manufacturer:
Midmark
Model of Sterilizer:
M7
Problem Title:
Installing Door gasket
Problem Description:
I recently purchased a door gasket from you for a Ritter M7 and need to know how to remove the old and replace it with your new one. Please advise. Thanks Mike

Solutions

1. You can use a paper clip or bobby pin to pull the old gasket out of the chamber. Once it is out enough, you can then pull it out using your fingers. Install the new gasket by inserting it at the 12 oclock position and then at the 6 oclock, 3 oclock and 9 oclock position. From there keep inserting the gasket by pushing it into the groove at the points that it sticks out the most and finally, just keep working it into the groove along the perimeter.

The technical information is just to help sterilizer users as reference to do their trouble shooting.
no guarranty implied. For each specific technical help to do with sterilizers
or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us