| Sterilizer Manufacturer: Castle |
| Model of Sterilizer: |
|
Problem Title:
Fill mechanism is not working |
|
Problem Description:
The Fill lever on the front of the Castle M7 Autoclave is not working. Water is not filling in the cavity. Thank you. Debby Keogh |
| Reasons |
| 1. Sorry this was missed. You may have some blockages in your tubing to the fill vent valve or there is not enough movement on the lever. You may also need to replace the fill-vent valve. Part # below: |
|
Solutions |
| 1. You can check the tubing for blockages but you may also need to change the fill vent valve. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |