| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer E/EA/EK/EKA LOW TEMP |
|
Problem Description:
Tuttnauer E/EA/EK/EKA LOW TEMP |
| Reasons |
| 1. Tuttnauer E/EA/EK/EKA LOW TEMP This message is displayed, the Cycle Fail indicator lights and the cycle is aborted inf the temperature drops 2.5C (4.5F) below the required sterilization temperature. Possible causes: 1) SSR 2) Insufficient water in the chamber 3) the sterilization phase set too long, to make the machine run out of water 4) Safety thermostat works prematurely only applied to T93N5 and T93N6 5) a bad temperature sensor |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |