| Sterilizer Manufacturer: Fuji |
| Model of Sterilizer: |
|
Problem Title:
Pressure gauge |
|
Problem Description:
It is normal the pressure gauge is not going up while im doing steam sterilization of instrument |
| Reasons |
| 1. No...pressure should show. Are you using any indicators that change color when sterilization is acieved? Do you run spore test? |
|
Solutions |
| 1. Try to take a temperature reading from inside the chamber to confirm that you are reaching a temperature that will result in the correct pressure reading. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |