| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: |
|
Problem Title:
DELTA 8 10 sterilizer Error S2 |
|
Problem Description:
DELTA 8 10 sterilizer Error S2 |
| Reasons |
| 1. DELTA 8 10 sterilizer Error S2 Dump solenoid coil or circuit open |
| 2. 1) Check the dump solenoid ohm: 16 ohms? 2) Check the dump solenoid connection on the Power PCB board 3) Check the ribbon cable |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |