| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: Magnaclave |
|
Problem Title:
Magnaclave packs are wet |
|
Problem Description:
The magnaclave used to work well. However, lately every cycle I run, the packs are coming wet. What shall I do? |
| Reasons |
| 1. seems some water/steam remaining inside the chamber after the cycle |
|
Solutions |
| 1. try to make the Chamber filter to touch the bottom of the chamber. |
| 2. Try to make sure the load properly to allow the air touch their surface |
| 3. Make sure the water/steam vent back to reservoir after the cycle. it comes with a little noise from the reservior filter |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |