| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer E/EA/EK/EKA Safety Thermostat Problems |
|
Problem Description:
Tuttnauer There is no continuity across the safety thermostat |
| Reasons |
| 1. see solutions for detail |
|
Solutions |
| 1. To correctly check continuity unplug the unit and remove the two power wires from the Safety Thermostat, use an ohmmeter to check across the terminals for continuity Make sure the Chamber has cooled. If the Chamber remains hot the Safety Thermostat will not automatically reset. If the Safety Thermostat will not automatically reset and restore continuity across it’s terminals then replace the Safety Thermostat |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |