| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Display Problem Tuttnauer E/EA/EK/EAK |
|
Problem Description:
The display is on but no characters are visible on Tuttnauer sterilizer |
| Reasons |
| 1. Check display control signal and the LED display itself |
|
Solutions |
| 1. Check the DC between TP17 and TP1 to make sure a +5V supply. If not change the power supply unit Adjust P1 on the Digital Predg board Replace the microprocessor Try other LED display, the LED may be damaged |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |