| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer E/EA/EK/EAK Printer Problem |
|
Problem Description:
Printer does not print |
| Reasons |
| 1. Check the solutions for details |
|
Solutions |
| 1. Make sure there is paper in the Printer Make sure the paper is installed correctly Make sure the paper is thermal paper Make sure there is not scraps or paper stuck in the printer head. Turn the unit off and unplug and replug in the Printer Cable Make sure the # 8 dip switch (on the Digital Predg board) is in the up position. Cycle the machine off and then on if you had to move the dip switch Turn the power off, press and hold the FEED button on the Printer and turn the power back on. This should print a test pattern If the Printer will not print a test pattern then replace the Printer If the Printer does print a test pattern, but will not print data then replace the Printer Cable and or the Digital Predg board |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |