| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer E/EA/EK/EAK Printer Problem |
|
Problem Description:
Printer prints upside down |
| Reasons |
| 1. Printer setting issue |
|
Solutions |
| 1. Turn the unit off Remove the front cover of the Printer In the upper left hand corner of the Printer on the bottom side of the circuit board there is a small switch. This switch must be positioned to the left Replace the Printer Cover Turn the unit back on |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |