| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Water Pump Problem of Tuttnauer E/EA/EK/EAK |
|
Problem Description:
Pump does not pump water |
| Reasons |
| 1. The pump strainer is clogged. In some early version E machine, there is a soft filter between 2 mesh screen. This soft filter always cause the problem. |
| 2. Water fill solenoid |
| 3. Pump itself |
|
Solutions |
| 1. Alwasy check the Pump Strainer Filter first. And make sure there is NO soft filter between the 2 mesh screen. |
| 2. Then check the water filling solenoid, first just check its magnetic field to make sure it can be activated or not. If not check the electric board connection. if the solenoid can be activated, then check its plunger is easy to move inside the housing or not. If not, replace the solenoid. Otherwise replace the pump |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |