| Sterilizer Manufacturer: Barnstead International |
| Model of Sterilizer: |
|
Problem Title:
BarnStead Sterilizer Cycle Halted |
|
Problem Description:
The cycle halted, display reads: "Cycle Halted Due To Heatup Exceeding Mazium Heatup Time, Push Stop To Reset" |
| Reasons |
| 1. The temperature in the vessel has not reached the specified setpoint within 115 minutes. |
|
Solutions |
| 1. Check for adequate water fill at the beginning of cycle. |
| 2. Check solenoid valves/door gasket for leaks. |
| 3. see "Sterilizer will not heat." |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |