| Sterilizer Manufacturer: Barnstead International |
| Model of Sterilizer: |
|
Problem Title:
BarnStead Sterilizer Cycle Halted |
|
Problem Description:
Cycle halted, display reads:"Cycle Failed Due to Over Temperature Condition, Press Stop. To Continue" |
| Reasons |
| 1. The temperature inside the chamber has exceeded more than 5C above the setpoint. |
|
Solutions |
| 1. Press the STOP button, allow chamber to depressurize and cool, drain the chamber, restart cycle. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |