| Sterilizer Manufacturer: Barnstead International |
| Model of Sterilizer: |
|
Problem Title:
BarnStead Sterilizer Exposure phase too long |
|
Problem Description:
Exposure phase lengthened beyond programmed time |
| Reasons |
| 1. Temperature in the chamber dropped more than 1C but not more than 5C below the setpoint, causing the exposure phase timer to reset. (Not applicable to liquid cycle.) |
|
Solutions |
| 1. None necessary. Load is sterile at end of cycle |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |