| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: Tuttnauer Labclave |
|
Problem Title:
Tuttnauer Labclave-Low Heat Fail Error |
|
Problem Description:
Error print out of Low Heat Fail when use Flash 273 Cycle, but not occur during Flow 250 cycle. |
| Reasons |
| 1. probably reasons: For all E/EA/EKA/EHS machines 1) thermostat cut-off protection needs to replace, it activates early before 273F 2) some leaking or stock in pipes, gaskets, solenoid, ... 3) pressure sensor For Tuttnauer E/EA/EKA SSR relay For Tuttnauer EHS lower water sensor for the jacket water |
|
Solutions |
| 1. see above reasons for detail. The customer did not give us exactly the model of Tuttnauer, so we can only give him a reply in general how to fix this machine. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |