| Sterilizer Manufacturer: Pelton & Crane |
| Model of Sterilizer: OCM |
|
Problem Title:
Pelton & Crane OCM- pressure gauge is not working |
|
Problem Description:
OCM pressure gauge is not working |
| Reasons |
| 1. The pressure gauge needs to be replaced. |
|
Solutions |
| 1. YOu will need to take the case off (there are 3 screws on both sides of the sterilizer), and one on the back. Once the case comes off, you will need a ranch to open the nut on the back of the gauge, and replace it with the new one. Very simple. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |