| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: Tuttnauer 1730M/MK |
|
Problem Title:
Tuttnauer 1730MK-How to replace door bellow |
|
Problem Description:
Can you tell me step by step how to replace the door bellows in the Tuttnauer 1730MK |
| Reasons |
| 1. Very good question, you need special tools |
|
Solutions |
| 1. A special tool needed. 1) First way: If you have any pressured air (like gas station air pump), try to run pressured air inside the hole (face to the chamber). Normally the pressured air will PUSH the door safety bellow out. 2) If the way 1 failed, then you need a special tool, like driller to "Catch" the old bellow, then pull it out. This way, most components of the bellow will be damaged, except its cyclinder, which can be re-used. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |