| Sterilizer Manufacturer: Midmark |
| Model of Sterilizer: M11 |
|
Problem Title:
Midmark M11 Sterilizer - keeps beeping after the cycle and shows E008 |
|
Problem Description:
It shows error code E008 after a cycle |
| Reasons |
| 1. E008 mostly it means the door does not open after the cycle. However sometime, if the pressure/temperature is out of calibration, it will show this error too. |
|
Solutions |
| 1. Mostly check to door mechanism and its position switch and solenoid. However sometime if the pressure meter out of calibration, it also shows E008. You can fix E008 by re-calibrate the machine |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |