| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: 2540 & 3870 EHS |
|
Problem Title:
TUTTNAUER MODEL 2540, FUSE KEEPS TRIPPING DURING DRY CYCLE, AND DURING MAX TEMP. |
|
Problem Description:
TUTTNAUER MODEL 2540, FUSE KEEPS TRIPPING DURING DRY CYCLE AND WHEN MAX TEMP. IS SET DURING STE CYCLE, USING 10 AMP, 250 VOLT FUSE |
|
Solutions |
| 1. Your question is not very clean. You submitted your quesiton under EHS type of machine. For 2540EHS, it only needs 2 fuses: 7A/230V for vacuum pump and 1.25A/230V for water pump.Neither one is related with heating elements. So I assume that you have a 2540EHS, the fuse is for the water pump (7A/230V). If this is the machine, 2 main reasons: The vacuum pump does not work properly, its shaft may too tight; or some problem with the fuse connection. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |