| Sterilizer Manufacturer: Scican Statim |
| Model of Sterilizer: Statim 2000 |
|
Problem Title:
my esterilizer rports error 8 when in in proces of heating |
|
Problem Description:
when is in process of heating , my esterilizer repots error 8 |
| Reasons |
| 1. The software has detected a steam generator (boiler) temperature 5C degree less than the chamber, within 7.2 seconds after a purge during the sterilizing phase of a cycle |
|
Solutions |
| 1. 1) Calibrate the boiler. 2) If problem persists replace and calibrate the boiler, then field service technical repair needed. |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |