| Sterilizer Manufacturer: Tuttnauer |
| Model of Sterilizer: |
|
Problem Title:
Tuttnauer EHS the vacuum pump does not work at all |
|
Problem Description:
Tuttnauer EHS the vacuum pump does not work at all |
| Reasons |
| 1. Tuttnauer EHS the vacuum pump does not work at all 1) Check its water reservoir supply 2) check the lower float in the reservoir 3) check the fuse at the rear side of the unit 4) with the power off, check the pump is free to rotate (you can use a small screwdriver to tight or loose it.) this is very important, for the safety of shipping reason, it may be hard to rotate when the customer first time to run this machine. 5) check the TP5 at DIG-T2 board 6) If the pump is overheated, the thermal protector will be activated and stop the pump. Check the valves (15) and (52) to make sure enough cooling water for the pump |
|
|
|||||
|
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |