Sterilizer Manufacturer: ALFA Medical Equipment |
Model of Sterilizer: |
Problem Title:
cox |
Problem Description:
not heating properly |
Reasons |
1. The most likely reason for this is usually a bad heater element but at times can be caused by a failed main blower or a damaged circuit board. |
Solutions |
1. Check to make sure that with the draw removed and the unit turned on, that there is good air-flow in the chamber. You can unplug the sterilizer, remove the back and check the ohms on the heater element. |
|
|||||
The technical information is just to help sterilizer users as reference to do their trouble shooting. no guarranty implied. For each specific technical help to do with sterilizers or autoclaves, go to www.sterilizers.com ... or call 1-800-801-9934 Contact Us |